Takex PB-IN-50HFA Outdoor Photoelectric Beam Sensor
Takex PB-IN-50HFA Outdoor Photoelectric Beam Sensor - Image 2
Takex PB-IN-50HFA Outdoor Photoelectric Beam Sensor - Image 3
Takex PB-IN-50HFA Outdoor Photoelectric Beam Sensor - Image 4
Takex PB-IN-50HFA Outdoor Photoelectric Beam Sensor - Image 5
Takex PB-IN-50HFA Outdoor Photoelectric Beam Sensor - Image 6
Takex PB-IN-50HFA Outdoor Photoelectric Beam Sensor - Image 7

Takex PB-IN-50HFA Outdoor Photoelectric Beam Sensor

$798.00

Takex PB-IN-50HFA  165′  Outdoor Photoelectric Beam Sensor – 4 SYNCHRONIZED HIGH POWER INFRARED [PATENTED]

  • 4 beams are “and-gated”, which help to prevent false alarms from falling leaves and small animals.
  • The active infrared transmission is exceptionally strong with a maximum arrival distance ten times greater than the specified protection distance.
  • External light compensation circuit provides excellent tolerance against sun light, automobile head lights, fluorescent light or mercury light.

HS Code: 85311090

Country Of Origin: Japan , Vietnam , UK

Resources:

SKU: SECATXPBIN50HFA Categories: , , , ,

Description

The TAKEX intelligent “Q UAD” photoelectric beam is especially designed for outdoor protection.

Unique Quad beams are synchronized to work together to reinforce the range and stability in severe weather conditions.

The PB -IN-H FA series beams are equipped with many features which provide a wide choice of field selectable options. These options result in considerable flexibility f or a variety of application requirements.

By synchronizing 16 beam paths between Transmitter and Receiver, the PB-IN-HFA series offer unrivalled stability in perimeter security. Coupled with channel separation and environmental (anti-fog) circuitry, the PB-IN-HFA series has earned worldwide recognition as the standard our rivals aspire to.

General Features:

  • 4 x Synchronised high power beams
  • 4 x Selectable beam channels to prevent crosstalk
  • Environmental monitoring circuit
  • Double modulation for unsurpassed light immunity
  • Auto-gain lock (AGL)
  • 50,000 lux sunlight immunity
  • Vivid internal body stickers aid beam alignment procedure
  • PB-50/100/200HFA-KH for TA series Beam Towers also available
  • IP55 housing

Specific Features:

  • FOUR FREQUENCIES SELECTIONS: 4 separate choices of frequency avoid cross-talk.
  • BEAM TRANSMISSION STRENGTH SELECTION: 2 levels of beam transmission strength which can be set to suit the protection distance.
  • AUTO-GAIN LOCK: Optimal sensitivity gain is automatically set at any coverage distance up to the maximum protection distance. Auto-Gain lock is easily confirmed by sound check.
  • PROGRAMMED AGC: Sensitivity is automatically increased in bad weather to contend with fog, heavy rain, frost or snow.
  • ALARM MEMORY: Alarm memory LED located on receiver can be automatically reset (flickering 5 min. after an alarm and auto-reset 55 min. after that) or manually controlled.
  • PROTECTION AGAINST FROST/DEW: As a special hood is attached on sensor cover, beam protection continues without interruption even when the cover is screened by frost or dew.
  • ENVIRONMENTAL MODULE BUILT-IN:  Environmental trouble signal is sent when beam reception level is reduced below an acceptable level.
  • EASY BEAM ALIGNMENT: Audible signal for alignment [Utility model] An alignment tone aids in quick set-up to beams. The tone becomes maximum at peak of beam level. | Sensitivity attenuation LED Lights when beam level is attenuated, which shows low sensitivity. | Monitor jack output | Target color | Wide adjustment  (horizontally ±90°,vertically ±10°).

Other Features:

  • Tamper output  (transmitter and receiver)
  • Polycarbonate cover excellent at anti-shock

Technical Information:

  • Brand: Takex | Manufacturer: Takex
  • Type: Quad Beam
  • Detection system : Near infrared beam interruption system (TR-RE 4 beams simultaneous interruption)
  • Infrared beam:  Double modulation pulsed beams by LED
  • Detection distance: Outdoor 165′ (50m) or less
  • Max. arrival distance: Tenfold 1650′ (500m)
  • Response time: 50msec. to 700msec. variable (Standard : 50msec.)
  • Frequency Selection:  4 Channels
  • Supply voltage: 12V to 30V DC (non-polarity)
  • Current consumption: 60mA or less at protection (max. 95mA or less)
  • Alarm output: Dry contact relay: NO or NC (selectable) | Reset: Interruption time + off-delay (approx. 1.5sec) | Contact capacity: 30V (AC/DC) 1A or less
  • Environmental output: Dry contact relay: NO or NC (selectable) | Contact operation: Output when weather condition gets worse | Contact capacity: 30V (AC/DC) 1A or less
  • Tamper output: Dry contact relay: NC | Contact operation: Output when receiver cover is detached | Contact capacity: 30V (AC/DC) 0.1A or less
  • LED indicator:  Red LED (receiver) – Lights when an alarm is initiated | Lights when beam reception is attenuated
  • Functions: Modulated beam frequency selection, Tone indicator, Environmental module, Beam power selection, Alarm memory indication, Programmed AGC, Auto-gain lock function, Monitor jack.
  • Adjustment: Horizontal : +/-90°, Vertical : +/-10°
  • Mounting position:  Outdoor
  • Wiring: Terminal
  • Weight: Transmitter – 42oz (1200g) , Receiver – 45.5oz (1300g)
  • Appearance: Resin (wine red)
  • Ambient temperature:  -31°F to +151°F (-35°C to +66°C)
  • IP Rating: IP55

Related products